b'System Components How It WorksThe ParkUSA EleVader oil/water interceptor is available with theAs water and oil accumulate in the following components: elevator sump pit, a oat sensor will activate the sump pump. The Elevator sump pump: Submersible sump located in the sumppump moves the oily water to the area of the elevator. Each hoistway is required to have a pumpadjacent oil/water separator. The capable of removing all uids at 50 gpm per elevator car. separator uses patented technology to effectively remove Oil/water separator is located freestanding on the oor near theoil from the wastestream and shaft, or can be located outdoors buried belowgrade. safely retain oil for future removal. The pretreated oil-free wastewater Available Models: drains into a oor drain that Model ES - our most popular design for freestanding applications discharges into the sanitary sewer.Model EC - for direct-bury applicationsModel EX - for freestanding and space saving applications The EleVader control panel Sump alarm panel (intrinsic safe): Indicates high sump level ormonitors the sump pump activity high oil level of the separator in the event of a high accumulationand allows for manual or of oil. The panel has a separator high level light and horn, aautomatic pump operation. The silence button, and an auxiliary contact for a buildinguid levels are monitored for the automation system (BAS). elevator pit and the separator. The EleVader provides a safe, Visit elevader.parkusa.com for more information and designseamless, and code-approved assistance.solution for managing water in all elevator pits.To request a quote or catalog, visit request.parkusa.com.Each elevator shaft is required to have a pump capable of pumping Typical EleVader 50 gpm per elevator cab. Application EleVaderongurationsare available to serve multiple shafts and cabs.Control PanelOil/Water SeparatorModel ECModel EXSump PumpFloat SensorAPPLICATIONSMedical Skyscrapers Commercial HotelsGood to useMulti Story Facilities in BMPsFamily Home'