b'GENERAL INFORMATION Sand-mud interceptors are used in commercial establishments Sand-mud interceptors are used in commercial establishments to removeto remove excessive amounts of excessive amounts of sand-mud and silt, which may interfere with the propersand-mud and silt, which may drainage and treatment of wastewater. Local plumbing codes generallyinterfere with the proper drainage require the installation of a sand mud interceptor prior to discharging into theand treatment of wastewater.public sanitary sewer system. Optional debris baskets are available to prevent solids greater than 1/2 inch in mass from entering public sewer system. Typical applications include vehicle/equipment wash down, maintenance garages, andFEATURESmanufacturing facilities. The waste discharge from these facilities usually containsSizes from 500 gallons tohigh inorganic loads, including sand-mud/silt and detergents. 20,000 GallonsDesigned to Meet Local MODELS Plumbing CodesThe ParkUSA SMC Interceptors are manufactured of Class II, 4500 PSI precastHigh Strength Precast Concrete, concrete. Pre-casting the concrete shell insures that all units achieve structuralSteel, or Fiberglass Constructionand physical uniformity. The units are structurally engineered for H-20 truckHeavy Duty Cast Iron Access loading and can be buried without need for any other structural protection. Covers or Grates for Vehicular The unit is of monolithic construction at bottom and walls to insure against Traffic Loadingjoint leakage.Choices of Interior Protective The ParkUSA SMS Series Interceptors are steel units and are recommendedCoatings and Remote Monitoringfor application where the Sand - Mud Interceptor is installed in a freestanding position, i.e., in a basement or on a slab. The ParkUSA SMF Series Interceptors are manufactured with fiberglass or plastic designs and are used where lightweight construction is required.SMC InterceptorsSMS Series Interceptors SMF Series Interceptors 280'