b'GENERAL INFORMATION Wastewater that contains significant amounts of oils or Wastewater that contains significant amounts of oils or solids that interfere withsolids that interfere with the the proper drainage and treatment of effluent water must be treated before beingproper drainage and treatment discharged into the sanitary sewer system. To comply with effluent water qualityof effluent water must be treated standards mandated by the EPA and local plumbing codes, using wastewaterbefore being discharged into the treatment employing oil/water separators is common.sanitary sewer system. To comply with effluent water quality The ParkUSA Model AQU Oil-Water Separator is a UL listed passive gravity flowstandards mandated by the EPA system for the separation of oil from oil-water mixtures. The design utilizes theand local plumbing codes, using difference in specific gravities between oil and water (buoyancy force) heightenedwastewater treatment employing by the use of patented coalescing plates. Using a gravity flow system, the separatoroil/water separators is common. is designed to receive oily water and process it in a single step.FEATURESQualified & Tested per MODELS Underwriters Laboratory UL 2215Meets ULC-S656Used to process wastewater runoff for compliance withUS EPA Clean Water Act criteriaAvailable tank capacities from 300 to 50,000 gallonsHandles Flow Rates from45 to 10,000 gallons per minuteRate effluent efficiency ofless than 10 ppmOptional double-wall & jacketed designs offer integral secondary containment which SOCMP-S SOCMP-F can be tested for tightness or continuously monitored for leaksPrimary Storage Tank and secondary containment comparable with a wide rangeof oilsCorrosion protection of exterior tank constructed to nationally recognized UL & STI standards with strict third-party quality control inspection programCustomized manways can be provided for cost effective maintenance areasLiquid level sensors and control panels available to sense the oil level within the tank, and alert the operator when oil needs to be removedSOCMP308'